The Stealth Luminaire range
has a die cast aluminium body with a sloped angular profile to offer an unusual
design for contemporary applications. The luminaire has an IP rating of IP65.
The dished polycarbonate glazing reduces light pollution and sky glow. The glazing
is secured to the body of the luminaire by a wrap around spring steel band that
clips into the lantern body applying even pressure to the glazing profile. The
unit comes with a side entry mounting as standard to allow a variety of bracket
options. The Stealth is fitted with the Facet 7 optic, which is secured to a
removable tray which also houses the integral gear.
The Stealth Luminaire has
a body made from die cast aluminium with a glanded entry from the bracket coupling
into the luminaire body. The glazing is released by closing the sprung steel
frame for the glazing, which then hinges down providing access for relamping.
The standard optic supplied is the Facet 7 optic, which is mounted on a removable
tray. The lantern is supplied, as standard, as a side entry luminaire enabling
multiple units to be used with column brackets. The three sizes of luminaires
offer a variety of wattages and mounting heights.
All gear is class I wired
and a full range of discharge gear can be accommodated within the luminaire.
The gear is secured to the optic tray for easy removal and maintenance. Photocells
are fitted into the top of the luminaire; single and two-piece electronic cells
are available as standard. These should be factory fitted to ensure the ingress
rating of the luminaire is not compromised.
The Stealth fitting is designed
to be a side entry luminaire with a bracket entry of 42mm which also allows
34mm diameter brackets to be used. This covers mounting heights from 4m to 8m
to be accommodated with short outreach plain brackets to give a direct post
mounting option if required.
Photocells - Single
and two part electronic photocells are available as standard and should be
factory fitted to maintain the ingress rating of the fitting.
Finish variations
- The luminaire is supplied Black Ral 9005. Other colours are available but
may be subject to quantity, and prices may differ.
Luminaire
construction Cast aluminium body with recesses for sealing gaskets
and a sprung steel hinge to secure the glazing.
